- Overall diameter
- 29.25 in74.30 cm
- Diameter change
- -0.13%
- Width change
- -60 mm
- Wheel diameter
- 20.00 in50.80 cm
295/40R20 in inches & centimeters
Starting size: Calculated from the size code: 29.29 inches tall, 11.61 inches wide, with a 4.65-inch sidewall on a 20-inch wheel.
ES / PT open the calculator in Spanish or Portuguese with this size entered.
Convert this size or compare another
Tire dimensions · 295/40R20
Side view
Front view
- DOverall diameter
- 29.29 in74.40 cm
- WSection width
- 11.61 in29.50 cm
- SSidewall height
- 4.65 in11.80 cm
- WDWheel diameter
- 20.00 in50.80 cm
- CCircumference
- 92.02 in233.73 cm
Approximate size in inches≈ 29.29 × 11.61R20
Diameter × width R wheel diameter, all in inches. This conversion comes from the size code; check the tire maker’s catalog for available sizes.
Enter a second size to compare it with A.
Speedometer
Add a second size to compare these results.
Wheels
Add each wheel’s width, ET and spacer thickness to compare its inner and outer edges.
Nearby sizes
Compare a group of sizes
Fix your reference A, then add up to three candidates from the lists. Every change is measured against this A.
All units and formulas for 295/40R20
Starting size: 295/40R20
| Measurement | inches | centimeters | millimeters |
|---|---|---|---|
| Overall diameter | 29.29 in | 74.40 cm | 744.0 mm |
| Section width | 11.61 in | 29.50 cm | 295.0 mm |
| Sidewall height | 4.65 in | 11.80 cm | 118.0 mm |
| Circumference | 92.02 in | 233.73 cm | 2,337.3 mm |
| Wheel diameter | 20.00 in | 50.80 cm | 508.0 mm |
| Revolutions / mi | 688.5 | ||
| Revolutions / km | 427.8 | ||
How we calculate it
295 = section width in millimeters · 40 = sidewall as a percentage of width · 20 = wheel diameter in inches.
Overall diameter = (20 × 25.4) + (2 × 118) = 744 mm
Circumference = π × 744 ≈ 2,337.3 mm
Where to read a size on a real tire
The example below shows 245/40 ZR18 97Y. Read the same part of your tire’s sidewall to find its size and service markings.

The code on this tire reads 245/40 ZR18 97Y.
Product image: Continental Tire
This is the tread surface. Section width is measured across the sidewalls.
Product image: Continental TireBefore you change tire size
Check these points in the vehicle and tire specifications:
- Vehicle placard and manual: use an approved size and the required load and speed ratings.
- Wheel and tire specifications: check the approved wheel-width range and wheel offset.
- Space on the vehicle: check at full steering lock and through the suspension’s travel.
How these sizes are calculated
Dimensions come from the nominal size code. The catalog supplies the codes; the tire maker’s specification sheet supplies measurements for a particular model.
Calculation method and data sourcesClosest diameters to 295/40R20
- Overall diameter
- 29.39 in74.65 cm
- Diameter change
- +0.34%
- Width change
- -30 mm
- Wheel diameter
- 20.00 in50.80 cm
- Overall diameter
- 29.04 in73.75 cm
- Diameter change
- -0.87%
- Width change
- -40 mm
- Wheel diameter
- 20.00 in50.80 cm
- Overall diameter
- 28.98 in73.60 cm
- Diameter change
- -1.08%
- Width change
- -10 mm
- Wheel diameter
- 20.00 in50.80 cm
- Overall diameter
- 29.61 in75.20 cm
- Diameter change
- +1.08%
- Width change
- +10 mm
- Wheel diameter
- 20.00 in50.80 cm
- Overall diameter
- 28.96 in73.55 cm
- Diameter change
- -1.14%
- Width change
- +30 mm
- Wheel diameter
- 20.00 in50.80 cm
- Overall diameter
- 29.65 in75.30 cm
- Diameter change
- +1.21%
- Width change
- -50 mm
- Wheel diameter
- 20.00 in50.80 cm
- Overall diameter
- 29.74 in75.55 cm
- Diameter change
- +1.55%
- Width change
- -20 mm
- Wheel diameter
- 20.00 in50.80 cm
Closest diameters appear first. Check the tire maker’s measurements for the models you shortlist.