- Overall diameter
- 29.61 in75.20 cm
- Diameter change
- -0.13%
- Width change
- +60 mm
- Wheel diameter
- 20.00 in50.80 cm
245/50R20 in inches & centimeters
Starting size: Calculated from the size code: 29.65 inches tall, 9.65 inches wide, with a 4.82-inch sidewall on a 20-inch wheel.
ES / PT open the calculator in Spanish or Portuguese with this size entered.
Convert this size or compare another
Tire dimensions · 245/50R20
Side view
Front view
- DOverall diameter
- 29.65 in75.30 cm
- WSection width
- 9.65 in24.50 cm
- SSidewall height
- 4.82 in12.25 cm
- WDWheel diameter
- 20.00 in50.80 cm
- CCircumference
- 93.13 in236.56 cm
Approximate size in inches≈ 29.65 × 9.65R20
Diameter × width R wheel diameter, all in inches. This conversion comes from the size code; check the tire maker’s catalog for available sizes.
Enter a second size to compare it with A.
Speedometer
Add a second size to compare these results.
Wheels
Add each wheel’s width, ET and spacer thickness to compare its inner and outer edges.
Nearby sizes
Compare a group of sizes
Fix your reference A, then add up to three candidates from the lists. Every change is measured against this A.
All units and formulas for 245/50R20
Starting size: 245/50R20
| Measurement | inches | centimeters | millimeters |
|---|---|---|---|
| Overall diameter | 29.65 in | 75.30 cm | 753.0 mm |
| Section width | 9.65 in | 24.50 cm | 245.0 mm |
| Sidewall height | 4.82 in | 12.25 cm | 122.5 mm |
| Circumference | 93.13 in | 236.56 cm | 2,365.6 mm |
| Wheel diameter | 20.00 in | 50.80 cm | 508.0 mm |
| Revolutions / mi | 680.3 | ||
| Revolutions / km | 422.7 | ||
How we calculate it
245 = section width in millimeters · 50 = sidewall as a percentage of width · 20 = wheel diameter in inches.
Overall diameter = (20 × 25.4) + (2 × 122.5) = 753 mm
Circumference = π × 753 ≈ 2,365.6 mm
Where to read a size on a real tire
The example below shows 245/40 ZR18 97Y. Read the same part of your tire’s sidewall to find its size and service markings.

The code on this tire reads 245/40 ZR18 97Y.
Product image: Continental Tire
This is the tread surface. Section width is measured across the sidewalls.
Product image: Continental TireBefore you change tire size
Check these points in the vehicle and tire specifications:
- Vehicle placard and manual: use an approved size and the required load and speed ratings.
- Wheel and tire specifications: check the approved wheel-width range and wheel offset.
- Space on the vehicle: check at full steering lock and through the suspension’s travel.
How these sizes are calculated
Dimensions come from the nominal size code. The catalog supplies the codes; the tire maker’s specification sheet supplies measurements for a particular model.
Calculation method and data sourcesClosest diameters to 245/50R20
- Overall diameter
- 29.74 in75.55 cm
- Diameter change
- +0.33%
- Width change
- +30 mm
- Wheel diameter
- 20.00 in50.80 cm
- Overall diameter
- 29.39 in74.65 cm
- Diameter change
- -0.86%
- Width change
- +20 mm
- Wheel diameter
- 20.00 in50.80 cm
- Overall diameter
- 29.29 in74.40 cm
- Diameter change
- -1.20%
- Width change
- +50 mm
- Wheel diameter
- 20.00 in50.80 cm
- Overall diameter
- 29.25 in74.30 cm
- Diameter change
- -1.33%
- Width change
- -10 mm
- Wheel diameter
- 20.00 in50.80 cm
- Overall diameter
- 30.04 in76.30 cm
- Diameter change
- +1.33%
- Width change
- +10 mm
- Wheel diameter
- 20.00 in50.80 cm
- Overall diameter
- 30.10 in76.45 cm
- Diameter change
- +1.53%
- Width change
- +40 mm
- Wheel diameter
- 20.00 in50.80 cm
- Overall diameter
- 30.18 in76.65 cm
- Diameter change
- +1.79%
- Width change
- -10 mm
- Wheel diameter
- 20.00 in50.80 cm
Closest diameters appear first. Check the tire maker’s measurements for the models you shortlist.