- Overall diameter
- 28.98 in73.60 cm
- Diameter change
- -0.20%
- Width change
- +30 mm
- Wheel diameter
- 20.00 in50.80 cm
255/45R20 in inches & centimeters
Starting size: Calculated from the size code: 29.04 inches tall, 10.04 inches wide, with a 4.52-inch sidewall on a 20-inch wheel.
ES / PT open the calculator in Spanish or Portuguese with this size entered.
Convert this size or compare another
Tire dimensions · 255/45R20
Side view
Front view
- DOverall diameter
- 29.04 in73.75 cm
- WSection width
- 10.04 in25.50 cm
- SSidewall height
- 4.52 in11.48 cm
- WDWheel diameter
- 20.00 in50.80 cm
- CCircumference
- 91.22 in231.69 cm
Approximate size in inches≈ 29.04 × 10.04R20
Diameter × width R wheel diameter, all in inches. This conversion comes from the size code; check the tire maker’s catalog for available sizes.
Enter a second size to compare it with A.
Speedometer
Add a second size to compare these results.
Wheels
Add each wheel’s width, ET and spacer thickness to compare its inner and outer edges.
Nearby sizes
Compare a group of sizes
Fix your reference A, then add up to three candidates from the lists. Every change is measured against this A.
All units and formulas for 255/45R20
Starting size: 255/45R20
| Measurement | inches | centimeters | millimeters |
|---|---|---|---|
| Overall diameter | 29.04 in | 73.75 cm | 737.5 mm |
| Section width | 10.04 in | 25.50 cm | 255.0 mm |
| Sidewall height | 4.52 in | 11.48 cm | 114.8 mm |
| Circumference | 91.22 in | 231.69 cm | 2,316.9 mm |
| Wheel diameter | 20.00 in | 50.80 cm | 508.0 mm |
| Revolutions / mi | 694.6 | ||
| Revolutions / km | 431.6 | ||
How we calculate it
255 = section width in millimeters · 45 = sidewall as a percentage of width · 20 = wheel diameter in inches.
Overall diameter = (20 × 25.4) + (2 × 114.75) = 737.5 mm
Circumference = π × 737.5 ≈ 2,316.9 mm
Where to read a size on a real tire
The example below shows 245/40 ZR18 97Y. Read the same part of your tire’s sidewall to find its size and service markings.

The code on this tire reads 245/40 ZR18 97Y.
Product image: Continental Tire
This is the tread surface. Section width is measured across the sidewalls.
Product image: Continental TireBefore you change tire size
Check these points in the vehicle and tire specifications:
- Vehicle placard and manual: use an approved size and the required load and speed ratings.
- Wheel and tire specifications: check the approved wheel-width range and wheel offset.
- Space on the vehicle: check at full steering lock and through the suspension’s travel.
How these sizes are calculated
Dimensions come from the nominal size code. The catalog supplies the codes; the tire maker’s specification sheet supplies measurements for a particular model.
Calculation method and data sourcesClosest diameters to 255/45R20
- Overall diameter
- 28.96 in73.55 cm
- Diameter change
- -0.27%
- Width change
- +70 mm
- Wheel diameter
- 20.00 in50.80 cm
- Overall diameter
- 29.25 in74.30 cm
- Diameter change
- +0.75%
- Width change
- -20 mm
- Wheel diameter
- 20.00 in50.80 cm
- Overall diameter
- 29.29 in74.40 cm
- Diameter change
- +0.88%
- Width change
- +40 mm
- Wheel diameter
- 20.00 in50.80 cm
- Overall diameter
- 28.68 in72.85 cm
- Diameter change
- -1.22%
- Width change
- -10 mm
- Wheel diameter
- 20.00 in50.80 cm
- Overall diameter
- 28.68 in72.85 cm
- Diameter change
- -1.22%
- Width change
- +60 mm
- Wheel diameter
- 20.00 in50.80 cm
- Overall diameter
- 29.39 in74.65 cm
- Diameter change
- +1.22%
- Width change
- +10 mm
- Wheel diameter
- 20.00 in50.80 cm
- Overall diameter
- 28.66 in72.80 cm
- Diameter change
- -1.29%
- Width change
- +20 mm
- Wheel diameter
- 20.00 in50.80 cm
Closest diameters appear first. Check the tire maker’s measurements for the models you shortlist.