TIREVS.

Wheel offset calculator

See how wheel width, offset and spacers change the wheel’s inner and outer positions. Effective ET = offset − spacer thickness.

A · Original wheel
B · New wheel

ET after spacer = entered ET − spacer thickness. Adding a 5 mm spacer moves that wheel 5 mm outward.

A · ET after spacer+35.00 mm+1.38 in+3.50 cm
B · ET after spacer+25.00 mm+0.98 in+2.50 cm

Wheel-edge movement

Inner edge change+2.70 mm+0.11 in+0.27 cm

The inner edge reaches further inward.

Outer edge change+22.70 mm+0.89 in+2.27 cm

The outer edge reaches further outward.

Wheel positions relative to the hub

← Inboard · −Hub mounting face · 0Outboard · + →
ABETeff +35 mmETeff +25 mm

Dashed line: wheel centerline. Zero is the hub’s mounting face. Negative values are inboard; positive values are outboard. ETeff is ET after the spacer.

A · Original

Wheel width
203.20 mm8.00 in20.32 cm
Wheel ET
+35.00 mm+1.38 in+3.50 cm
Spacer
0.00 mm0.00 in0.00 cm
Effective ET
+35.00 mm+1.38 in+3.50 cm
Inner edge position
-136.60 mm-5.38 in-13.66 cm
Outer edge position
+66.60 mm+2.62 in+6.66 cm

B · New

Wheel width
228.60 mm9.00 in22.86 cm
Wheel ET
+25.00 mm+0.98 in+2.50 cm
Spacer
0.00 mm0.00 in0.00 cm
Effective ET
+25.00 mm+0.98 in+2.50 cm
Inner edge position
-139.30 mm-5.48 in-13.93 cm
Outer edge position
+89.30 mm+3.52 in+8.93 cm

Wheel barrel illustration. Both wheels use the same horizontal scale, with width measured between bead seats. The drawing’s height is illustrative. Check the maker’s drawing for wheel shape and brake space.

How we calculate it

Δ = (New wheel: Wheel width (in) − Original wheel: Wheel width (in)) × 25.4 / 2
Inner edge = Δ + (ET B − S B) − (ET A − S A)
Outer edge = Δ − (ET B − S B) + (ET A − S A)

S = spacer thickness in mm. Example with 0 mm spacers: 8 in ET35 → 9 in ET25 extends 2.7 mm (0.27 cm / 0.11 in) further inward and 22.7 mm (2.27 cm / 0.89 in) further outward. A negative result means movement in the opposite direction.

Before you change tire size

Check these points in the vehicle and tire specifications:

  • Vehicle placard and manual: use an approved size and the required load and speed ratings.
  • Wheel and tire specifications: check the approved wheel-width range and wheel offset.
  • Space on the vehicle: check at full steering lock and through the suspension’s travel.

Wheel width is measured between bead seats. Use the wheel maker’s drawing for overall width and flange shape; check the installed tire, steering travel, suspension movement and brake clearance.

Compare sizes