- Overall diameter
- 33.21 in84.35 cm
- Diameter change
- -0.76%
- Width change
- +20 mm
- Wheel diameter
- 20.00 in50.80 cm
285/60R20 in inches & centimeters
Starting size: Calculated from the size code: 33.46 inches tall, 11.22 inches wide, with a 6.73-inch sidewall on a 20-inch wheel.
Convert this size or compare another
Tire dimensions · 285/60R20
Side view
Front view
- DOverall diameter
- 33.46 in85.00 cm
- WSection width
- 11.22 in28.50 cm
- SSidewall height
- 6.73 in17.10 cm
- WDWheel diameter
- 20.00 in50.80 cm
- CCircumference
- 105.13 in267.04 cm
Approximate size in inches≈ 33.46 × 11.22R20
Diameter × width R wheel diameter, all in inches. This conversion comes from the size code; check the tire maker’s catalog for available sizes.
Enter a second size to compare it with A.
Speedometer
Add a second size to compare these results.
Wheels
Add each wheel’s width, ET and spacer thickness to compare its inner and outer edges.
Nearby sizes
Compare a group of sizes
Fix your reference A, then add up to three candidates from the lists. Every change is measured against this A.
All units and formulas for 285/60R20
Starting size: 285/60R20
| Measurement | inches | centimeters | millimeters |
|---|---|---|---|
| Overall diameter | 33.46 in | 85.00 cm | 850.0 mm |
| Section width | 11.22 in | 28.50 cm | 285.0 mm |
| Sidewall height | 6.73 in | 17.10 cm | 171.0 mm |
| Circumference | 105.13 in | 267.04 cm | 2,670.4 mm |
| Wheel diameter | 20.00 in | 50.80 cm | 508.0 mm |
| Revolutions / mi | 602.7 | ||
| Revolutions / km | 374.5 | ||
How we calculate it
285 = section width in millimeters · 60 = sidewall as a percentage of width · 20 = wheel diameter in inches.
Overall diameter = (20 × 25.4) + (2 × 171) = 850 mm
Circumference = π × 850 ≈ 2,670.4 mm
Where to read a size on a real tire
The example below shows 245/40 ZR18 97Y. Read the same part of your tire’s sidewall to find its size and service markings.

The code on this tire reads 245/40 ZR18 97Y.
Product image: Continental Tire
This is the tread surface. Section width is measured across the sidewalls.
Product image: Continental TireBefore you change tire size
Check these points in the vehicle and tire specifications:
- Vehicle placard and manual: use an approved size and the required load and speed ratings.
- Wheel and tire specifications: check the approved wheel-width range and wheel offset.
- Space on the vehicle: check at full steering lock and through the suspension’s travel.
How these sizes are calculated
Dimensions come from the nominal size code. The catalog supplies the codes; the tire maker’s specification sheet supplies measurements for a particular model.
Calculation method and data sourcesComparisons with 285/60R20
Closest diameters to 285/60R20
- Overall diameter
- 33.00 in83.82 cm
- Diameter change
- -1.39%
- Width change
- +32.50 mm
- Wheel diameter
- 20.00 in50.80 cm
- Overall diameter
- 32.99 in83.80 cm
- Diameter change
- -1.41%
- Width change
- -10 mm
- Wheel diameter
- 20.00 in50.80 cm
- Overall diameter
- 33.94 in86.20 cm
- Diameter change
- +1.41%
- Width change
- +10 mm
- Wheel diameter
- 20.00 in50.80 cm
- Overall diameter
- 34.07 in86.55 cm
- Diameter change
- +1.82%
- Width change
- -10 mm
- Wheel diameter
- 20.00 in50.80 cm
- Overall diameter
- 32.80 in83.30 cm
- Diameter change
- -2.00%
- Width change
- +40 mm
- Wheel diameter
- 20.00 in50.80 cm
- Overall diameter
- 32.78 in83.25 cm
- Diameter change
- -2.06%
- Width change
- +10 mm
- Wheel diameter
- 20.00 in50.80 cm
- Overall diameter
- 32.52 in82.60 cm
- Diameter change
- -2.82%
- Width change
- -20 mm
- Wheel diameter
- 20.00 in50.80 cm
Closest diameters appear first. Check the tire maker’s measurements for the models you shortlist.