- Overall diameter
- 26.48 in67.25 cm
- Diameter change
- +0.30%
- Width change
- -90 mm
- Wheel diameter
- 20.00 in50.80 cm
325/25R20 in inches & centimeters
Starting size: Calculated from the size code: 26.40 inches tall, 12.80 inches wide, with a 3.20-inch sidewall on a 20-inch wheel.
ES / PT open the calculator in Spanish or Portuguese with this size entered.
Convert this size or compare another
Tire dimensions · 325/25R20
Side view
Front view
- DOverall diameter
- 26.40 in67.05 cm
- WSection width
- 12.80 in32.50 cm
- SSidewall height
- 3.20 in8.13 cm
- WDWheel diameter
- 20.00 in50.80 cm
- CCircumference
- 82.93 in210.64 cm
Approximate size in inches≈ 26.40 × 12.80R20
Diameter × width R wheel diameter, all in inches. This conversion comes from the size code; check the tire maker’s catalog for available sizes.
Enter a second size to compare it with A.
Speedometer
Add a second size to compare these results.
Wheels
Add each wheel’s width, ET and spacer thickness to compare its inner and outer edges.
Nearby sizes
Compare a group of sizes
Fix your reference A, then add up to three candidates from the lists. Every change is measured against this A.
All units and formulas for 325/25R20
Starting size: 325/25R20
| Measurement | inches | centimeters | millimeters |
|---|---|---|---|
| Overall diameter | 26.40 in | 67.05 cm | 670.5 mm |
| Section width | 12.80 in | 32.50 cm | 325.0 mm |
| Sidewall height | 3.20 in | 8.13 cm | 81.3 mm |
| Circumference | 82.93 in | 210.64 cm | 2,106.4 mm |
| Wheel diameter | 20.00 in | 50.80 cm | 508.0 mm |
| Revolutions / mi | 764.0 | ||
| Revolutions / km | 474.7 | ||
How we calculate it
325 = section width in millimeters · 25 = sidewall as a percentage of width · 20 = wheel diameter in inches.
Overall diameter = (20 × 25.4) + (2 × 81.25) = 670.5 mm
Circumference = π × 670.5 ≈ 2,106.4 mm
Where to read a size on a real tire
The example below shows 245/40 ZR18 97Y. Read the same part of your tire’s sidewall to find its size and service markings.

The code on this tire reads 245/40 ZR18 97Y.
Product image: Continental Tire
This is the tread surface. Section width is measured across the sidewalls.
Product image: Continental TireBefore you change tire size
Check these points in the vehicle and tire specifications:
- Vehicle placard and manual: use an approved size and the required load and speed ratings.
- Wheel and tire specifications: check the approved wheel-width range and wheel offset.
- Space on the vehicle: check at full steering lock and through the suspension’s travel.
How these sizes are calculated
Dimensions come from the nominal size code. The catalog supplies the codes; the tire maker’s specification sheet supplies measurements for a particular model.
Calculation method and data sourcesClosest diameters to 325/25R20
- Overall diameter
- 26.50 in67.30 cm
- Diameter change
- +0.37%
- Width change
- -50 mm
- Wheel diameter
- 20.00 in50.80 cm
- Overall diameter
- 26.26 in66.70 cm
- Diameter change
- -0.52%
- Width change
- -60 mm
- Wheel diameter
- 20.00 in50.80 cm
- Overall diameter
- 26.20 in66.55 cm
- Diameter change
- -0.75%
- Width change
- -100 mm
- Wheel diameter
- 20.00 in50.80 cm
- Overall diameter
- 26.59 in67.55 cm
- Diameter change
- +0.75%
- Width change
- +10 mm
- Wheel diameter
- 20.00 in50.80 cm
- Overall diameter
- 26.73 in67.90 cm
- Diameter change
- +1.27%
- Width change
- -40 mm
- Wheel diameter
- 20.00 in50.80 cm
- Overall diameter
- 26.75 in67.95 cm
- Diameter change
- +1.34%
- Width change
- -80 mm
- Wheel diameter
- 20.00 in50.80 cm
- Overall diameter
- 26.02 in66.10 cm
- Diameter change
- -1.42%
- Width change
- -70 mm
- Wheel diameter
- 20.00 in50.80 cm
Closest diameters appear first. Check the tire maker’s measurements for the models you shortlist.