- Overall diameter
- 26.75 in67.95 cm
- Diameter change
- +0.07%
- Width change
- -40 mm
- Wheel diameter
- 20.00 in50.80 cm
285/30R20 in inches & centimeters
Starting size: Calculated from the size code: 26.73 inches tall, 11.22 inches wide, with a 3.37-inch sidewall on a 20-inch wheel.
ES / PT open the calculator in Spanish or Portuguese with this size entered.
Convert this size or compare another
Tire dimensions · 285/30R20
Side view
Front view
- DOverall diameter
- 26.73 in67.90 cm
- WSection width
- 11.22 in28.50 cm
- SSidewall height
- 3.37 in8.55 cm
- WDWheel diameter
- 20.00 in50.80 cm
- CCircumference
- 83.98 in213.31 cm
Approximate size in inches≈ 26.73 × 11.22R20
Diameter × width R wheel diameter, all in inches. This conversion comes from the size code; check the tire maker’s catalog for available sizes.
Enter a second size to compare it with A.
Speedometer
Add a second size to compare these results.
Wheels
Add each wheel’s width, ET and spacer thickness to compare its inner and outer edges.
Nearby sizes
Compare a group of sizes
Fix your reference A, then add up to three candidates from the lists. Every change is measured against this A.
All units and formulas for 285/30R20
Starting size: 285/30R20
| Measurement | inches | centimeters | millimeters |
|---|---|---|---|
| Overall diameter | 26.73 in | 67.90 cm | 679.0 mm |
| Section width | 11.22 in | 28.50 cm | 285.0 mm |
| Sidewall height | 3.37 in | 8.55 cm | 85.5 mm |
| Circumference | 83.98 in | 213.31 cm | 2,133.1 mm |
| Wheel diameter | 20.00 in | 50.80 cm | 508.0 mm |
| Revolutions / mi | 754.4 | ||
| Revolutions / km | 468.8 | ||
How we calculate it
285 = section width in millimeters · 30 = sidewall as a percentage of width · 20 = wheel diameter in inches.
Overall diameter = (20 × 25.4) + (2 × 85.5) = 679 mm
Circumference = π × 679 ≈ 2,133.1 mm
Where to read a size on a real tire
The example below shows 245/40 ZR18 97Y. Read the same part of your tire’s sidewall to find its size and service markings.

The code on this tire reads 245/40 ZR18 97Y.
Product image: Continental Tire
This is the tread surface. Section width is measured across the sidewalls.
Product image: Continental TireBefore you change tire size
Check these points in the vehicle and tire specifications:
- Vehicle placard and manual: use an approved size and the required load and speed ratings.
- Wheel and tire specifications: check the approved wheel-width range and wheel offset.
- Space on the vehicle: check at full steering lock and through the suspension’s travel.
How these sizes are calculated
Dimensions come from the nominal size code. The catalog supplies the codes; the tire maker’s specification sheet supplies measurements for a particular model.
Calculation method and data sourcesClosest diameters to 285/30R20
- Overall diameter
- 26.59 in67.55 cm
- Diameter change
- -0.52%
- Width change
- +50 mm
- Wheel diameter
- 20.00 in50.80 cm
- Overall diameter
- 26.50 in67.30 cm
- Diameter change
- -0.88%
- Width change
- -10 mm
- Wheel diameter
- 20.00 in50.80 cm
- Overall diameter
- 26.97 in68.50 cm
- Diameter change
- +0.88%
- Width change
- +10 mm
- Wheel diameter
- 20.00 in50.80 cm
- Overall diameter
- 26.48 in67.25 cm
- Diameter change
- -0.96%
- Width change
- -50 mm
- Wheel diameter
- 20.00 in50.80 cm
- Overall diameter
- 27.03 in68.65 cm
- Diameter change
- +1.10%
- Width change
- -30 mm
- Wheel diameter
- 20.00 in50.80 cm
- Overall diameter
- 26.40 in67.05 cm
- Diameter change
- -1.25%
- Width change
- +40 mm
- Wheel diameter
- 20.00 in50.80 cm
- Overall diameter
- 27.09 in68.80 cm
- Diameter change
- +1.33%
- Width change
- -60 mm
- Wheel diameter
- 20.00 in50.80 cm
Closest diameters appear first. Check the tire maker’s measurements for the models you shortlist.