- Overall diameter
- 34.81 in88.42 cm
- Diameter change
- +0.51%
- Width change
- -20 mm
- Wheel diameter
- 18.00 in45.72 cm
325/65R18 in inches & centimeters
Starting size: Calculated from the size code: 34.63 inches tall, 12.80 inches wide, with a 8.32-inch sidewall on a 18-inch wheel.
ES / PT open the calculator in Spanish or Portuguese with this size entered.
Convert this size or compare another
Tire dimensions · 325/65R18
Side view
Front view
- DOverall diameter
- 34.63 in87.97 cm
- WSection width
- 12.80 in32.50 cm
- SSidewall height
- 8.32 in21.13 cm
- WDWheel diameter
- 18.00 in45.72 cm
- CCircumference
- 108.81 in276.37 cm
Approximate size in inches≈ 34.63 × 12.80R18
Diameter × width R wheel diameter, all in inches. This conversion comes from the size code; check the tire maker’s catalog for available sizes.
Enter a second size to compare it with A.
Speedometer
Add a second size to compare these results.
Wheels
Add each wheel’s width, ET and spacer thickness to compare its inner and outer edges.
Nearby sizes
Compare a group of sizes
Fix your reference A, then add up to three candidates from the lists. Every change is measured against this A.
All units and formulas for 325/65R18
Starting size: 325/65R18
| Measurement | inches | centimeters | millimeters |
|---|---|---|---|
| Overall diameter | 34.63 in | 87.97 cm | 879.7 mm |
| Section width | 12.80 in | 32.50 cm | 325.0 mm |
| Sidewall height | 8.32 in | 21.13 cm | 211.3 mm |
| Circumference | 108.81 in | 276.37 cm | 2,763.7 mm |
| Wheel diameter | 18.00 in | 45.72 cm | 457.2 mm |
| Revolutions / mi | 582.3 | ||
| Revolutions / km | 361.8 | ||
How we calculate it
325 = section width in millimeters · 65 = sidewall as a percentage of width · 18 = wheel diameter in inches.
Overall diameter = (18 × 25.4) + (2 × 211.25) = 879.7 mm
Circumference = π × 879.7 ≈ 2,763.7 mm
Where to read a size on a real tire
The example below shows 245/40 ZR18 97Y. Read the same part of your tire’s sidewall to find its size and service markings.

The code on this tire reads 245/40 ZR18 97Y.
Product image: Continental Tire
This is the tread surface. Section width is measured across the sidewalls.
Product image: Continental TireBefore you change tire size
Check these points in the vehicle and tire specifications:
- Vehicle placard and manual: use an approved size and the required load and speed ratings.
- Wheel and tire specifications: check the approved wheel-width range and wheel offset.
- Space on the vehicle: check at full steering lock and through the suspension’s travel.
How these sizes are calculated
Dimensions come from the nominal size code. The catalog supplies the codes; the tire maker’s specification sheet supplies measurements for a particular model.
Calculation method and data sourcesClosest diameters to 325/65R18
- Overall diameter
- 34.83 in88.47 cm
- Diameter change
- +0.57%
- Width change
- -40 mm
- Wheel diameter
- 18.00 in45.72 cm
- Overall diameter
- 34.26 in87.02 cm
- Diameter change
- -1.08%
- Width change
- -30 mm
- Wheel diameter
- 18.00 in45.72 cm
- Overall diameter
- 35.36 in89.82 cm
- Diameter change
- +2.10%
- Width change
- -10 mm
- Wheel diameter
- 18.00 in45.72 cm
- Overall diameter
- 33.71 in85.62 cm
- Diameter change
- -2.67%
- Width change
- -40 mm
- Wheel diameter
- 18.00 in45.72 cm
- Overall diameter
- 33.61 in85.37 cm
- Diameter change
- -2.96%
- Width change
- -20 mm
- Wheel diameter
- 18.00 in45.72 cm
- Overall diameter
- 33.35 in84.72 cm
- Diameter change
- -3.69%
- Width change
- 0 mm
- Wheel diameter
- 18.00 in45.72 cm
- Overall diameter
- 33.16 in84.22 cm
- Diameter change
- -4.26%
- Width change
- -50 mm
- Wheel diameter
- 18.00 in45.72 cm
Closest diameters appear first. Check the tire maker’s measurements for the models you shortlist.