- Overall diameter
- 31.10 in78.99 cm
- Diameter change
- -0.44%
- Width change
- -40 mm
- Wheel diameter
- 21.00 in53.34 cm
325/40R21 in inches & centimeters
Starting size: Calculated from the size code: 31.24 inches tall, 12.80 inches wide, with a 5.12-inch sidewall on a 21-inch wheel.
ES / PT open the calculator in Spanish or Portuguese with this size entered.
Convert this size or compare another
Tire dimensions · 325/40R21
Side view
Front view
- DOverall diameter
- 31.24 in79.34 cm
- WSection width
- 12.80 in32.50 cm
- SSidewall height
- 5.12 in13.00 cm
- WDWheel diameter
- 21.00 in53.34 cm
- CCircumference
- 98.13 in249.25 cm
Approximate size in inches≈ 31.24 × 12.80R21
Diameter × width R wheel diameter, all in inches. This conversion comes from the size code; check the tire maker’s catalog for available sizes.
Enter a second size to compare it with A.
Speedometer
Add a second size to compare these results.
Wheels
Add each wheel’s width, ET and spacer thickness to compare its inner and outer edges.
Nearby sizes
Compare a group of sizes
Fix your reference A, then add up to three candidates from the lists. Every change is measured against this A.
All units and formulas for 325/40R21
Starting size: 325/40R21
| Measurement | inches | centimeters | millimeters |
|---|---|---|---|
| Overall diameter | 31.24 in | 79.34 cm | 793.4 mm |
| Section width | 12.80 in | 32.50 cm | 325.0 mm |
| Sidewall height | 5.12 in | 13.00 cm | 130.0 mm |
| Circumference | 98.13 in | 249.25 cm | 2,492.5 mm |
| Wheel diameter | 21.00 in | 53.34 cm | 533.4 mm |
| Revolutions / mi | 645.7 | ||
| Revolutions / km | 401.2 | ||
How we calculate it
325 = section width in millimeters · 40 = sidewall as a percentage of width · 21 = wheel diameter in inches.
Overall diameter = (21 × 25.4) + (2 × 130) = 793.4 mm
Circumference = π × 793.4 ≈ 2,492.5 mm
Where to read a size on a real tire
The example below shows 245/40 ZR18 97Y. Read the same part of your tire’s sidewall to find its size and service markings.

The code on this tire reads 245/40 ZR18 97Y.
Product image: Continental Tire
This is the tread surface. Section width is measured across the sidewalls.
Product image: Continental TireBefore you change tire size
Check these points in the vehicle and tire specifications:
- Vehicle placard and manual: use an approved size and the required load and speed ratings.
- Wheel and tire specifications: check the approved wheel-width range and wheel offset.
- Space on the vehicle: check at full steering lock and through the suspension’s travel.
How these sizes are calculated
Dimensions come from the nominal size code. The catalog supplies the codes; the tire maker’s specification sheet supplies measurements for a particular model.
Calculation method and data sourcesClosest diameters to 325/40R21
- Overall diameter
- 31.04 in78.84 cm
- Diameter change
- -0.63%
- Width change
- -70 mm
- Wheel diameter
- 21.00 in53.34 cm
- Overall diameter
- 30.92 in78.54 cm
- Diameter change
- -1.01%
- Width change
- -10 mm
- Wheel diameter
- 21.00 in53.34 cm
- Overall diameter
- 30.74 in78.09 cm
- Diameter change
- -1.58%
- Width change
- -50 mm
- Wheel diameter
- 21.00 in53.34 cm
- Overall diameter
- 31.83 in80.84 cm
- Diameter change
- +1.89%
- Width change
- -50 mm
- Wheel diameter
- 21.00 in53.34 cm
- Overall diameter
- 30.61 in77.74 cm
- Diameter change
- -2.02%
- Width change
- -20 mm
- Wheel diameter
- 21.00 in53.34 cm
- Overall diameter
- 32.04 in81.39 cm
- Diameter change
- +2.58%
- Width change
- -70 mm
- Wheel diameter
- 21.00 in53.34 cm
- Overall diameter
- 30.39 in77.19 cm
- Diameter change
- -2.71%
- Width change
- -60 mm
- Wheel diameter
- 21.00 in53.34 cm
Closest diameters appear first. Check the tire maker’s measurements for the models you shortlist.