- Overall diameter
- 28.04 in71.22 cm
- Diameter change
- +0.42%
- Width change
- -60 mm
- Wheel diameter
- 18.00 in45.72 cm
315/40R18 in inches & centimeters
Starting size: Calculated from the size code: 27.92 inches tall, 12.40 inches wide, with a 4.96-inch sidewall on a 18-inch wheel.
ES / PT open the calculator in Spanish or Portuguese with this size entered.
Convert this size or compare another
Tire dimensions · 315/40R18
Side view
Front view
- DOverall diameter
- 27.92 in70.92 cm
- WSection width
- 12.40 in31.50 cm
- SSidewall height
- 4.96 in12.60 cm
- WDWheel diameter
- 18.00 in45.72 cm
- CCircumference
- 87.72 in222.80 cm
Approximate size in inches≈ 27.92 × 12.40R18
Diameter × width R wheel diameter, all in inches. This conversion comes from the size code; check the tire maker’s catalog for available sizes.
Enter a second size to compare it with A.
Speedometer
Add a second size to compare these results.
Wheels
Add each wheel’s width, ET and spacer thickness to compare its inner and outer edges.
Nearby sizes
Compare a group of sizes
Fix your reference A, then add up to three candidates from the lists. Every change is measured against this A.
All units and formulas for 315/40R18
Starting size: 315/40R18
| Measurement | inches | centimeters | millimeters |
|---|---|---|---|
| Overall diameter | 27.92 in | 70.92 cm | 709.2 mm |
| Section width | 12.40 in | 31.50 cm | 315.0 mm |
| Sidewall height | 4.96 in | 12.60 cm | 126.0 mm |
| Circumference | 87.72 in | 222.80 cm | 2,228.0 mm |
| Wheel diameter | 18.00 in | 45.72 cm | 457.2 mm |
| Revolutions / mi | 722.3 | ||
| Revolutions / km | 448.8 | ||
How we calculate it
315 = section width in millimeters · 40 = sidewall as a percentage of width · 18 = wheel diameter in inches.
Overall diameter = (18 × 25.4) + (2 × 126) = 709.2 mm
Circumference = π × 709.2 ≈ 2,228.0 mm
Where to read a size on a real tire
The example below shows 245/40 ZR18 97Y. Read the same part of your tire’s sidewall to find its size and service markings.

The code on this tire reads 245/40 ZR18 97Y.
Product image: Continental Tire
This is the tread surface. Section width is measured across the sidewalls.
Product image: Continental TireBefore you change tire size
Check these points in the vehicle and tire specifications:
- Vehicle placard and manual: use an approved size and the required load and speed ratings.
- Wheel and tire specifications: check the approved wheel-width range and wheel offset.
- Space on the vehicle: check at full steering lock and through the suspension’s travel.
How these sizes are calculated
Dimensions come from the nominal size code. The catalog supplies the codes; the tire maker’s specification sheet supplies measurements for a particular model.
Calculation method and data sourcesClosest diameters to 315/40R18
- Overall diameter
- 27.74 in70.47 cm
- Diameter change
- -0.63%
- Width change
- -90 mm
- Wheel diameter
- 18.00 in45.72 cm
- Overall diameter
- 27.74 in70.47 cm
- Diameter change
- -0.63%
- Width change
- -40 mm
- Wheel diameter
- 18.00 in45.72 cm
- Overall diameter
- 28.16 in71.52 cm
- Diameter change
- +0.85%
- Width change
- -100 mm
- Wheel diameter
- 18.00 in45.72 cm
- Overall diameter
- 28.18 in71.57 cm
- Diameter change
- +0.92%
- Width change
- -80 mm
- Wheel diameter
- 18.00 in45.72 cm
- Overall diameter
- 27.65 in70.22 cm
- Diameter change
- -0.99%
- Width change
- -70 mm
- Wheel diameter
- 18.00 in45.72 cm
- Overall diameter
- 27.61 in70.12 cm
- Diameter change
- -1.13%
- Width change
- -10 mm
- Wheel diameter
- 18.00 in45.72 cm
- Overall diameter
- 27.51 in69.87 cm
- Diameter change
- -1.48%
- Width change
- +30 mm
- Wheel diameter
- 18.00 in45.72 cm
Closest diameters appear first. Check the tire maker’s measurements for the models you shortlist.