- Overall diameter
- 25.96 in65.93 cm
- Diameter change
- -0.08%
- Width change
- -110 mm
- Wheel diameter
- 17.00 in43.18 cm
285/40R17 in inches & centimeters
Starting size: Calculated from the size code: 25.98 inches tall, 11.22 inches wide, with a 4.49-inch sidewall on a 17-inch wheel.
ES / PT open the calculator in Spanish or Portuguese with this size entered.
Convert this size or compare another
Tire dimensions · 285/40R17
Side view
Front view
- DOverall diameter
- 25.98 in65.98 cm
- WSection width
- 11.22 in28.50 cm
- SSidewall height
- 4.49 in11.40 cm
- WDWheel diameter
- 17.00 in43.18 cm
- CCircumference
- 81.61 in207.28 cm
Approximate size in inches≈ 25.98 × 11.22R17
Diameter × width R wheel diameter, all in inches. This conversion comes from the size code; check the tire maker’s catalog for available sizes.
Enter a second size to compare it with A.
Speedometer
Add a second size to compare these results.
Wheels
Add each wheel’s width, ET and spacer thickness to compare its inner and outer edges.
Nearby sizes
Compare a group of sizes
Fix your reference A, then add up to three candidates from the lists. Every change is measured against this A.
All units and formulas for 285/40R17
Starting size: 285/40R17
| Measurement | inches | centimeters | millimeters |
|---|---|---|---|
| Overall diameter | 25.98 in | 65.98 cm | 659.8 mm |
| Section width | 11.22 in | 28.50 cm | 285.0 mm |
| Sidewall height | 4.49 in | 11.40 cm | 114.0 mm |
| Circumference | 81.61 in | 207.28 cm | 2,072.8 mm |
| Wheel diameter | 17.00 in | 43.18 cm | 431.8 mm |
| Revolutions / mi | 776.4 | ||
| Revolutions / km | 482.4 | ||
How we calculate it
285 = section width in millimeters · 40 = sidewall as a percentage of width · 17 = wheel diameter in inches.
Overall diameter = (17 × 25.4) + (2 × 114) = 659.8 mm
Circumference = π × 659.8 ≈ 2,072.8 mm
Where to read a size on a real tire
The example below shows 245/40 ZR18 97Y. Read the same part of your tire’s sidewall to find its size and service markings.

The code on this tire reads 245/40 ZR18 97Y.
Product image: Continental Tire
This is the tread surface. Section width is measured across the sidewalls.
Product image: Continental TireBefore you change tire size
Check these points in the vehicle and tire specifications:
- Vehicle placard and manual: use an approved size and the required load and speed ratings.
- Wheel and tire specifications: check the approved wheel-width range and wheel offset.
- Space on the vehicle: check at full steering lock and through the suspension’s travel.
How these sizes are calculated
Dimensions come from the nominal size code. The catalog supplies the codes; the tire maker’s specification sheet supplies measurements for a particular model.
Calculation method and data sourcesClosest diameters to 285/40R17
- Overall diameter
- 26.04 in66.13 cm
- Diameter change
- +0.23%
- Width change
- -30 mm
- Wheel diameter
- 17.00 in43.18 cm
- Overall diameter
- 25.88 in65.73 cm
- Diameter change
- -0.38%
- Width change
- -80 mm
- Wheel diameter
- 17.00 in43.18 cm
- Overall diameter
- 25.86 in65.68 cm
- Diameter change
- -0.45%
- Width change
- -60 mm
- Wheel diameter
- 17.00 in43.18 cm
- Overall diameter
- 26.21 in66.58 cm
- Diameter change
- +0.91%
- Width change
- -90 mm
- Wheel diameter
- 17.00 in43.18 cm
- Overall diameter
- 26.23 in66.63 cm
- Diameter change
- +0.99%
- Width change
- +50 mm
- Wheel diameter
- 17.00 in43.18 cm
- Overall diameter
- 26.25 in66.68 cm
- Diameter change
- +1.06%
- Width change
- -50 mm
- Wheel diameter
- 17.00 in43.18 cm
- Overall diameter
- 25.68 in65.23 cm
- Diameter change
- -1.14%
- Width change
- -40 mm
- Wheel diameter
- 17.00 in43.18 cm
Closest diameters appear first. Check the tire maker’s measurements for the models you shortlist.