- Overall diameter
- 28.33 in71.95 cm
- Diameter change
- -0.07%
- Width change
- -30 mm
- Wheel diameter
- 20.00 in50.80 cm
265/40R20 in inches & centimeters
Starting size: Calculated from the size code: 28.35 inches tall, 10.43 inches wide, with a 4.17-inch sidewall on a 20-inch wheel.
ES / PT open the calculator in Spanish or Portuguese with this size entered.
Convert this size or compare another
Tire dimensions · 265/40R20
Side view
Front view
- DOverall diameter
- 28.35 in72.00 cm
- WSection width
- 10.43 in26.50 cm
- SSidewall height
- 4.17 in10.60 cm
- WDWheel diameter
- 20.00 in50.80 cm
- CCircumference
- 89.05 in226.19 cm
Approximate size in inches≈ 28.35 × 10.43R20
Diameter × width R wheel diameter, all in inches. This conversion comes from the size code; check the tire maker’s catalog for available sizes.
Enter a second size to compare it with A.
Speedometer
Add a second size to compare these results.
Wheels
Add each wheel’s width, ET and spacer thickness to compare its inner and outer edges.
Nearby sizes
Compare a group of sizes
Fix your reference A, then add up to three candidates from the lists. Every change is measured against this A.
All units and formulas for 265/40R20
Starting size: 265/40R20
| Measurement | inches | centimeters | millimeters |
|---|---|---|---|
| Overall diameter | 28.35 in | 72.00 cm | 720.0 mm |
| Section width | 10.43 in | 26.50 cm | 265.0 mm |
| Sidewall height | 4.17 in | 10.60 cm | 106.0 mm |
| Circumference | 89.05 in | 226.19 cm | 2,261.9 mm |
| Wheel diameter | 20.00 in | 50.80 cm | 508.0 mm |
| Revolutions / mi | 711.5 | ||
| Revolutions / km | 442.1 | ||
How we calculate it
265 = section width in millimeters · 40 = sidewall as a percentage of width · 20 = wheel diameter in inches.
Overall diameter = (20 × 25.4) + (2 × 106) = 720 mm
Circumference = π × 720 ≈ 2,261.9 mm
Where to read a size on a real tire
The example below shows 245/40 ZR18 97Y. Read the same part of your tire’s sidewall to find its size and service markings.

The code on this tire reads 245/40 ZR18 97Y.
Product image: Continental Tire
This is the tread surface. Section width is measured across the sidewalls.
Product image: Continental TireBefore you change tire size
Check these points in the vehicle and tire specifications:
- Vehicle placard and manual: use an approved size and the required load and speed ratings.
- Wheel and tire specifications: check the approved wheel-width range and wheel offset.
- Space on the vehicle: check at full steering lock and through the suspension’s travel.
How these sizes are calculated
Dimensions come from the nominal size code. The catalog supplies the codes; the tire maker’s specification sheet supplies measurements for a particular model.
Calculation method and data sourcesClosest diameters to 265/40R20
- Overall diameter
- 28.41 in72.15 cm
- Diameter change
- +0.21%
- Width change
- +40 mm
- Wheel diameter
- 20.00 in50.80 cm
- Overall diameter
- 28.15 in71.50 cm
- Diameter change
- -0.69%
- Width change
- +80 mm
- Wheel diameter
- 20.00 in50.80 cm
- Overall diameter
- 28.13 in71.45 cm
- Diameter change
- -0.76%
- Width change
- +30 mm
- Wheel diameter
- 20.00 in50.80 cm
- Overall diameter
- 28.03 in71.20 cm
- Diameter change
- -1.11%
- Width change
- -10 mm
- Wheel diameter
- 20.00 in50.80 cm
- Overall diameter
- 28.66 in72.80 cm
- Diameter change
- +1.11%
- Width change
- +10 mm
- Wheel diameter
- 20.00 in50.80 cm
- Overall diameter
- 28.68 in72.85 cm
- Diameter change
- +1.18%
- Width change
- -20 mm
- Wheel diameter
- 20.00 in50.80 cm
- Overall diameter
- 28.68 in72.85 cm
- Diameter change
- +1.18%
- Width change
- +50 mm
- Wheel diameter
- 20.00 in50.80 cm
Closest diameters appear first. Check the tire maker’s measurements for the models you shortlist.