- Overall diameter
- 25.98 in65.99 cm
- Diameter change
- -0.23%
- Width change
- -60 mm
- Wheel diameter
- 16.00 in40.64 cm
255/50R16 in inches & centimeters
Starting size: Calculated from the size code: 26.04 inches tall, 10.04 inches wide, with a 5.02-inch sidewall on a 16-inch wheel.
ES / PT open the calculator in Spanish or Portuguese with this size entered.
Convert this size or compare another
Tire dimensions · 255/50R16
Side view
Front view
- DOverall diameter
- 26.04 in66.14 cm
- WSection width
- 10.04 in25.50 cm
- SSidewall height
- 5.02 in12.75 cm
- WDWheel diameter
- 16.00 in40.64 cm
- CCircumference
- 81.81 in207.78 cm
Approximate size in inches≈ 26.04 × 10.04R16
Diameter × width R wheel diameter, all in inches. This conversion comes from the size code; check the tire maker’s catalog for available sizes.
Enter a second size to compare it with A.
Speedometer
Add a second size to compare these results.
Wheels
Add each wheel’s width, ET and spacer thickness to compare its inner and outer edges.
Nearby sizes
Compare a group of sizes
Fix your reference A, then add up to three candidates from the lists. Every change is measured against this A.
All units and formulas for 255/50R16
Starting size: 255/50R16
| Measurement | inches | centimeters | millimeters |
|---|---|---|---|
| Overall diameter | 26.04 in | 66.14 cm | 661.4 mm |
| Section width | 10.04 in | 25.50 cm | 255.0 mm |
| Sidewall height | 5.02 in | 12.75 cm | 127.5 mm |
| Circumference | 81.81 in | 207.78 cm | 2,077.8 mm |
| Wheel diameter | 16.00 in | 40.64 cm | 406.4 mm |
| Revolutions / mi | 774.5 | ||
| Revolutions / km | 481.3 | ||
How we calculate it
255 = section width in millimeters · 50 = sidewall as a percentage of width · 16 = wheel diameter in inches.
Overall diameter = (16 × 25.4) + (2 × 127.5) = 661.4 mm
Circumference = π × 661.4 ≈ 2,077.8 mm
Where to read a size on a real tire
The example below shows 245/40 ZR18 97Y. Read the same part of your tire’s sidewall to find its size and service markings.

The code on this tire reads 245/40 ZR18 97Y.
Product image: Continental Tire
This is the tread surface. Section width is measured across the sidewalls.
Product image: Continental TireBefore you change tire size
Check these points in the vehicle and tire specifications:
- Vehicle placard and manual: use an approved size and the required load and speed ratings.
- Wheel and tire specifications: check the approved wheel-width range and wheel offset.
- Space on the vehicle: check at full steering lock and through the suspension’s travel.
How these sizes are calculated
Dimensions come from the nominal size code. The catalog supplies the codes; the tire maker’s specification sheet supplies measurements for a particular model.
Calculation method and data sourcesClosest diameters to 255/50R16
- Overall diameter
- 26.16 in66.44 cm
- Diameter change
- +0.45%
- Width change
- -40 mm
- Wheel diameter
- 16.00 in40.64 cm
- Overall diameter
- 26.18 in66.49 cm
- Diameter change
- +0.53%
- Width change
- -20 mm
- Wheel diameter
- 16.00 in40.64 cm
- Overall diameter
- 25.74 in65.39 cm
- Diameter change
- -1.13%
- Width change
- -30 mm
- Wheel diameter
- 16.00 in40.64 cm
- Overall diameter
- 25.74 in65.39 cm
- Diameter change
- -1.13%
- Width change
- +20 mm
- Wheel diameter
- 16.00 in40.64 cm
- Overall diameter
- 25.69 in65.24 cm
- Diameter change
- -1.36%
- Width change
- -50 mm
- Wheel diameter
- 16.00 in40.64 cm
- Overall diameter
- 25.65 in65.14 cm
- Diameter change
- -1.51%
- Width change
- -10 mm
- Wheel diameter
- 16.00 in40.64 cm
- Overall diameter
- 26.49 in67.29 cm
- Diameter change
- +1.74%
- Width change
- -50 mm
- Wheel diameter
- 16.00 in40.64 cm
Closest diameters appear first. Check the tire maker’s measurements for the models you shortlist.