TIREVS.

285/75R16 vs 235/85R16

Changes from A to B, calculated from the tire size codes.

Diameter change
-28.00 mm-1.10 in-2.80 cm
Width change
-50.00 mm-1.97 in-5.00 cm
Axle-height change
-14.00 mm-0.55 in-1.40 cm
Estimated road speed
58.0 mphat 60.0 mph on the speedometer
Edit tire sizes
Show first

3.36% smaller diameter

Axle-height change-14.00 mm-0.55 in-1.40 cm

Side view

Front view

A285/75R16
Overall diameter
32.83 in83.39 cm
Section width
11.22 in28.50 cm
Sidewall height
8.42 in21.38 cm
Wheel diameter
16.00 in40.64 cm
Circumference
103.14 in261.98 cm
B235/85R16
Overall diameter
31.73 in80.59 cm
Section width
9.25 in23.50 cm
Sidewall height
7.86 in19.98 cm
Wheel diameter
16.00 in40.64 cm
Circumference
99.68 in253.18 cm

Both tires use the same scale. Dimensions are calculated from the size codes. Tread and wheel designs are illustrative.

Swipe the table to see every measurement and change.

MeasurementA · 285/75R16B · 235/85R16Change
Overall diameter32.83 in83.39 cm31.73 in80.59 cm-28.00 mm-1.10 in-2.80 cm
Section width11.22 in28.50 cm9.25 in23.50 cm-50.00 mm-1.97 in-5.00 cm
Sidewall height8.42 in21.38 cm7.86 in19.98 cm-14.00 mm-0.55 in-1.40 cm
Circumference103.14 in261.98 cm99.68 in253.18 cm-87.96 mm-3.46 in-8.80 cm
Wheel diameter16.00 in40.64 cm16.00 in40.64 cm0.00 mm0.00 in0.00 cm
Revolutions / mi614.3635.621.3

Speedometer and distance

The estimate uses the size ratio, with the speedometer calibrated for tire A. A tire model’s rolling circumference can differ.

Estimated road speed58.0 mphDifference: -2.0 mph
Speed change-3.36%
Speedometer reading (mph)Estimated road speed (mph)Difference (mph)
20.019.3-0.7
30.029.0-1.0
40.038.7-1.3
50.048.3-1.7
60.058.0-2.0
70.067.6-2.4
80.077.3-2.7
90.087.0-3.0
Target speed, odometer and final-drive ratio
Speedometer reading needed62.1 mph
Estimated distance traveled96.6 mi

The odometer estimate uses the same tire-circumference ratio, with A as the original calibration.

Enter your current final-drive ratio to compare the gearing.

Assumes the same transmission gear. The second value is a calculated ratio to compare with available gear sets.

Advanced: rolling data check

Use manufacturer rolling data or a loaded rollout, with the same method, load, pressure and speed for both tires. A is the original calibration; nominal diameter × π is not measured rolling data.

Enter data for both tires, then confirm the current pair.

Wheels

Add each wheel’s width, ET and spacer thickness to compare its inner and outer edges.

Nearby sizes

Fix your reference A, then add up to three candidates from the lists. Every change is measured against this A.

Before changing size, check the tire maker’s measurements and the vehicle’s tire and wheel specifications.

Before you change tire size

Check these points in the vehicle and tire specifications:

Details for the starting sizes

Open the size sheets for 285/75R16 and 235/85R16. If you change the inputs above, the calculator shows your new comparison.

Browse all tire sizes